Home / Sliding Glass Door Repair / Sliding Glass Door Alignment and Adjustment
Sliding Glass Door Repair

Sliding Glass Door Alignment and Adjustment in Tampa Bay

Sliding doors that sit crooked, leave a gap or will not latch are adjusted so they close square and seal.

What you should know

A slider has adjustment screws at each roller that raise or lower the corners of the panel. As parts wear and the house settles, the door drifts out of square.

We adjust the panel so the gap is even top to bottom, the latch meets the keeper and the weatherstripping makes contact. If the rollers will not hold an adjustment, they are due for replacement.

This is part of our sliding glass door repair service across Pinellas, Hillsborough and Pasco counties.

Signs of a misaligned door

  • A gap that is wider at the top or bottom
  • Daylight at the closed edge
  • The latch hits high or low
  • The door rubs the top track

How the job goes

Diagnose

We check the rollers, track, lock and glass to find what has actually failed.

Pull the panel

The door panel comes off the track so parts can be reached.

Replace what is worn

New rollers, hardware or glass go in, and the track is cleaned.

Reset and adjust

The panel goes back on and is adjusted so it rolls and locks properly.

FAQ

Sliding Glass Door Alignment and Adjustment questions

Can I adjust my sliding door myself?

Sometimes, with a screwdriver at the roller adjustment holes. Seized adjusters are common on older doors.

Will adjustment fix a draft?

If the draft is from an uneven gap, yes. Worn weatherstripping is replaced separately.

Why is my sliding glass door hard to open?

Usually worn rollers or a dirty, damaged track. New rollers and a cleaned, adjusted track normally fix it.

Get a quote for sliding glass door alignment and adjustment

Text us a photo of the glass or door and we will get back to you with a price. No obligation.