Foggy Window Glass Replacement in Tampa Bay
Cloudy, hazy or wet between the panes? The seal on your double-pane glass has failed. We replace just the sealed glass unit and keep your existing frame. It costs a lot less than a new window.
Why double-pane windows fog up
Double-pane windows are two sheets of glass sealed together around the edges, with insulating air or argon gas in between. That sealed sandwich is called an insulated glass unit, or IGU.
Florida’s heat, sun and humidity make the frame and glass expand and contract every day. Eventually the edge seal breaks down, humid air gets pulled inside, and it condenses into the fog, haze or streaks you can’t wipe off. Once that happens, the window has also lost most of its insulating value.
The good news is that the frame is usually fine. Only the glass unit has failed, and that’s the part we replace.
Signs of a failed seal
- Fog, haze or milky film between the panes
- Water droplets or condensation inside the glass
- White mineral streaks or spots you can’t clean
- Glass that looks dirty right after cleaning
- The room feels hotter or the AC runs more
How we fix foggy windows
Inspect & measure
We check the frame, confirm the seal failure and take exact glass measurements.
Order the new unit
A new sealed glass unit is built to your exact size, with options like Low-E, tempered or tint.
Swap the glass
We remove the stops, pull the failed unit, set the new one and reseal it in your existing frame.
Clean & check
We clean up, check operation and leave you with clear glass you can actually see through.
Glass replacement vs. a whole new window
A full window replacement means tearing out the frame, patching stucco or drywall, and often pulling a permit. If your frame is solid, that’s a lot of money and mess to fix a glass problem.
Replacing only the glass unit restores clear views and insulation for a fraction of the cost, usually with a quick install once the glass is ready.
If the frame is rotted, warped or leaking, we’ll tell you straight and quote a full replacement instead.
Glass options
- Clear insulated glass
- Low-E glass to cut heat and UV
- Tempered safety glass where code requires
- Obscure / privacy glass for bathrooms
- Tinted glass
Frequently asked questions
Can foggy windows be cleaned or defogged?
The fog is between the panes, so it can’t be cleaned from either side. Defogging services drill holes and vent the glass, but the seal stays broken and the insulating gas is gone. Replacing the sealed unit is the permanent fix.
Do I need to replace the whole window?
Usually not. If the frame is in good shape, we replace only the insulated glass unit and reuse your frame.
How long does it take?
Each glass unit is custom-built to your measurements, so there’s usually a short wait for fabrication. Installation is typically quick, often under an hour per window.
Will the new glass match my other windows?
We match the glass thickness, spacer and tint as closely as possible so it blends in with the rest of your windows.
Is it worth fixing just one foggy window?
Yes. A failed seal only gets worse, and you’re losing insulation through that window. Fixing it now also keeps moisture from building up on the frame.
Text us a photo of your foggy window
Send a picture and rough measurements and we’ll get you a price, usually the same day.